MITCalc - Tension Springs 1.13

The calculation is intended for the purposes of geometric and strength designs of helical tension cylindrical springs made of wires and rods of circular sections, cold formed, loaded with static loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards and support many 2D and 3D CAD systems.

See also: DIN 2097, DIN 2089-2, EN 13906-2, helical spring, tension spring, cylindrical spring, springs, Spring, static strength check, dynamic strength check.

MITCalc - Compression Springs 1.15

The calculation is intended for the purposes of geometric and strength designs of helical compression cylindrical springs made of wires and rods of circular sections, cold formed, loaded with static or fatigue loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards and support many 2D and 3D CAD systems.

See also: Spring, springs, cylindrical spring, compression spring, helical spring, EN 13906-1, DIN 2089-1, DIN 2095, static strength check, dynamic strength check.

Dolby Surround Meter 2006

The levels of all six channels as well as the phase correlation between all combinations of two channels are represented, so that defined statements are possible for the mono compatibility of a stereo and a Surround signal, in addition, for the Stereo compatibility of a Dolby Prologic signal . PAS-Surround Meter can be configured in a number of different ways,ballistic Nordic N9, BBC PPM, EBU PPM,DIN 45406 K-System K-20 K-14 and K-12

See also: Dolby, Surround, IEC 268-10 Type I - Nordic N9, IEC 268-10 Type IIa - BBC PPM, IEC268-10 Type IIb - EBU PPM, DIN 45406, 5.1

MITCalc - Torsion Springs 1.13

The calculation is intended for the purposes of geometric and strength designs of spiral cylindrical torsion springs made of wires and rods in circular sections, loaded with a static or cyclic loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards and support many 2D and 3D CAD systems.

See also: static strength check, DIN 2088, EN 13906-2, spiral spring, torsion spring, cylindrical spring, springs, Spring, dynamic strength check.

24 Channel Multi Level Meter Bridge 2006

PAS Multi Meter Bridge can be configured in a number of different ways, to accurately model the ballistics, responses and graphics of a wide range of standard peak programme meters. These meters currently include the following:IEC 268-10 Type I (Nordic N9 meter)IEC268-10 Type IIb (EBU PPM meter)IEC 268-10 Type IIa (BBC PPM meter) DIN 45406,You can monitor 8 input channels, 16 input channels or 24 input channels in realtime. integration time

See also: Meter, Type, channels, IEC, PPM, Integration, time, level, Nordic, BBC, EBU, Bridge, IIa, IIb, DIN, reference, ballistics

24 Channel Multi Level Meter Bridge 2006

PAS Multi Meter Bridge can be configured in a number of different ways, to accurately model the ballistics, responses and graphics of a wide range of standard peak programme meters. These meters currently include the following:IEC 268-10 Type I (Nordic N9 meter)IEC268-10 Type IIb (EBU PPM meter)IEC 268-10 Type IIa (BBC PPM meter) DIN 45406,You can monitor 8 input channels, 16 input channels or 24 input channels in realtime. integration time

See also: ballistics, reference, DIN, IIb, IIa, Bridge, EBU, BBC, Nordic, level, time, Integration, PPM, IEC, channels, Type, Meter

MITCalc - Shafts Calculation 1.16

The calculation is designed for geometrical design and complex strength check of shafts. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on AGMA, ISO and DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks, SolidEdge, Pro/E)

See also: Shaft, shafts, design, strength check, stress concentration, critical speed, safety coefficients, deflection, bending angle, DIN 743

MITCalc - Timing Belts Calculation 1.14

The calculation is designed for a geometrical design and strength check of toothed belt transmissions. Application contain a database of belts includes the 20 most frequently used types of toothed belts, is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, RMA, ISO, DIN and BS standards and support many 2D and 3D CAD systems.

See also: Belt, toothed belt, timing belt, synchronous belt, design, strength check, ANSI/RMA IP-24, 1983, DIN 7721, DIN ISO 5296, ISO 5295

MITCalc - Spur Gear Calculation 1.15

Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks, SolidEdge, Pro/E).

See also: Gearing, spur gearing, gear, tooth, toothing, design, strength check, helical, ISO 6336, ISO 1328, DIN 3990

MITCalc - Multi pulley calculation 1.14

The calculation is developed for geometrical designs of belt and chain transmissions with more sprocket wheels (max. 15). It solve the necessary length of the belt (chain) using known positions and diameters of sprocket wheels. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and support many 2D CAD systems. (AutoCAD, AutoCAD LT, IntelliCAD, TurboCAD...).

See also: belt, chain, belt transmission, chain transmission, sprocket, wheel, ANSI/RMA IP-24, 1983; DIN 7721; DIN ISO 5296; ISO 5295; ISO 5294, ANSI/ASME B29.1M, ANSI/ASME B29.3, DIN 8187

MITCalc - Roller Chains Calculation 1.14

Geometrical design and strength check of common chain transmissions using roller chains. The application works with many 2D and 3D CAD systems and includes corresponding databases of roller chains. The calculations use data, procedures and algorithms from ANSI/ASME, ACA (American Chain Association) ISO, DIN, BS and JIS. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units.

See also: Chain, roller chain, design, strength check, chain transmission, ANSI/ASME B29.1M, ANSI/ASME B29.3, DIN 8187, DIN 8181, DIN 8181, DIN 8164

MITCalc - V-Belts Calculation 1.15

The calculation is designed for a geometrical design and strength check of belt transmissions using V-belts. Application contain a database of belts includes the 24 most frequently used types of v-belts, is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, RMA, ISO, DIN and BS standards and support many 2D and 3D CAD systems.

See also: Belt, V-belt, V-belt transmission, design, strength check, Narrow V-Belts ANSI/RMA IP-22, Traditional V-Belts ANSI/RMA IP-20, Light Duty V-Belts ANSI/RMA IP-23, DIN 7753, DIN 2211, DIN 2215

MITCalc - Buckling Calculation 1.14

Calculation of the optimum cross-section of slender struts strained for buckling and calculation of the appropriate strength check according to Johnson, Tetmajer, Euler and Secant method. Simple definition of the strut type - 40 types of predefined cross sections.Used standards: DIN 1025, 1026, 1028, 1029, 1024, AISC W, S, C, L, LU

See also: buckling, slender strut, beam, column, moment, stress, safety, DIN 1025, 1026, 1028, 1029